2J4841PGF CELLULAR/LTE and GPS/GLONASS Adhesive Mount
4G LTE/3G/2G, GPS/GLONASS/Galileo 2 Cables Adhesive Antenna
Key Features
- 2-in-1 Combination Antenna
- Ground Plane Independent
- Wide band Antenna
- 698-2700 MHz 4GLTE Bands
- 2.4 dBi 4G LTE Peak Gain
- Active GNSS Antenna
- 28 dB GNSS Active Gain
- Pre-Filter GNSS
- GNSS Voltage Range 1.5 - 3.6 V
- Low Profile
- Customizable Cable and Connector
GPS/GLO/QZSS/Galileo/L1
| Mounting | Adhesive Mount |
|---|---|
| Dimensions (mm) | 83 x 35 x 13.3 |
| Operating temperature | -40 °C to +85 °C |
| Note | Antenna 2J4841PGFR equipped with 10K resistor for antenna detection is available. |
| Certificates | IP67, IP69 |
CONNECTION 1
CELLULAR/4G LTE
| Standards | 2G,3G and 4G |
|---|---|
| Frequency | 698-960, 1710-2170, 2500-2700 |
| VSWR | ~1.8:1, ~1.3:1, ~2.0:1 |
| Efficiency (%) | ~53, ~49, ~25 |
| Peak Gain (dBi) | ~2.4, ~1.3, ~0.4 |
| Impedance (Ohm) | 50 |
| Polarisation | Linear |
| Max. Input Power (W) | 25 |
CONNECTION 2
GPS/GLONASS
| Standards | GPS/QZSS/Galileo/GLONASS |
|---|---|
| Frequency | 1575.42, 1598-1606 |
| VSWR | <=1.4:1 |
| Impedance (Ohm) | 50 |
| Polarisation | RHCP |
| Active Gain (dB) | 28 @ 2.7 V |
| Saw Filter Type | Pre-Filter |
| Voltage (V) | 1.5 – 3.6 |
| Current (mA) | 9 Typ |
| Power Consumption (mW) | 24.3 Typ |