ICOM RP-SAT1

• Relays Iridium® and GNSS signals, and provides a solution for satellite communications indoors and mobile applications
• Indoor coverage: Maximum 5 m
• RF gain level can be adjusted on the front panel (40 to 50 dB)
• Compact design offers flexible installation: 265 × 55 × 170 (W × H × D, mm),
• 10.4 × 2.2 × 6.7 (W × H × D, inch)
• Not only satellite PTT (IC-SAT100), but also Iridium® satellite phones and SBD (Short Burst Data) service can be used
• Use supplied coaxial cables (5 m, 16.4 ft for indoor and 10 m, 32.8 ft for outdoor) or user supplied coaxial cables*1
  

Specifications:

• 1616.02–1626.48 MHz (Uplink/Downlink) 1575.42–1605.40 MHz (Downlink, GNSS L1 Band)
• 50 Ω (N-J connector) –30°C to +60°C, –22°F to +140°F
• 13.2/26.4 V DC nominal (10–32 V DC Operating Voltage) Less than 8.0 A (at relay) Less than 2.5 A (stand-by)
• 265 × 55 × 170 mm, 10.4 × 2.2 × 6.7 in 2.6 kg, 5.7 lb
• 40–50 dB (1 dB step adjustable) Gain 40 dB at 0 dBm Input Gain 50 dB at –10 dBm Input
• +40 dBm
• Less than 7% Less than –13.0 dBm
• 40–50 dB (1 dB step adjustable) at –80 dBm Input
• Less than 3.0 dBm Less than –13.0 dBm
• All stated specifications are subject to change without notice or obligation.
• Frequency range
• Antenna impedance
• Operating temperature range
• Power supply requirement