2JP0133BGF Iridium/GPS Combined Module Antenna

€42,00 EUR

Request a Quote
MOQ 25 units

The 2JP0133BGF GPS/GLONASS and Iridium Screw Mount Embedded Dual Antenna offers a 2-in-1 configuration bringing the next generation of global communication within GPS, QZSS, Galileo, GLONASS and Iridium standards. 

The hemispherical radiation pattern provides a full range connectivity between 1575 MHz - 1627 MHz frequencies. This embedded dual antenna offers an alternative solution where communication devices cannot use external antennas due to ergonomic, aesthetic or severe environmental conditions found in transportation, defense, agriculture and navigation markets. 

DOWNLOAD DATA SHEET

General Specifications

 
Mounting Screw Mount Module
Dimensions (mm) 74 x 45 x 8.8
Operating temperature -40 °C to +85 °C
Certificates Iridium Certified

 

All cables and connectors are customisable.

The GNSS Ceramic Active Antenna (Cable 1) offers exceptional reliability within GPS, QZSS, Galileo and GLONASS standards and offers uninterrupted signal strength within 1575.42 MHz and 1598 MHz - 1606 MHz frequencies. This low-profile antenna offers front-end SAW filter, high active gain of 28 db @ 2.7 V, low noise figure of 1.8 dB @ 2.7 V and low power consumption of 24.3 mW @ 2.7 V. Used for both receiving and transmitting applications, the GNSS Ceramic Active Antenna allows much longer cable runs through the integrated amplifier (AMP) maximizing the overall RF power. With U.FL standard connector type, 100 mm standard cable length and 1.37 mm Mini-Coax standard cable type, the 2JP0133BGF can be fully customised with a wide range of alternative connection types, cable types and cable lengths.

The IRIDIUM Ceramic Antenna (Cable 2) offers the most reliable global connectivity for Iridium standards on the market and brings optimal signal quality within 1616 MHz - 1627 MHz frequencies. 


CONNECTION 1                    GPS/GLONASS

Standards GPS/QZSS/Galileo/GLONASS
Frequency 1575.42, 1598-1606
Impedance (Ohm) 50
Active Gain (dB) 28 @ 2.7 V
Voltage (V) 1.5 – 3.6
Current (mA) 9 @ 2.7 V
Power Consumption (mW) 24.3 @ 2.7V
Saw Filter Type Pre-Filter

CONNECTION 2                    IRIDIUM

Standards IRIDIUM
Frequency 1616-1627
Passive Gain (dBi) ~4.5
Efficiency (%) ~76
Impedance (Ohm) 50
Axial Ratio (dB) 3 max
Radiation Pattern Hemispherical
Polarisation RHCP

 

DOWNLOAD DATA SHEET